AAton A-Minima Spécifications Page 16

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 33
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 15
shutter :
Go to the A-MINIMAOPTIONS menu, then press YES to enter.
COUNTER flashes, press the DOWN key to select SHUTTER,
press YES to access the SHUTTER MODE settings.
Use the UP or DOWN key to scroll through the five different
choices.
Depending on the mode you are in, the camera shutter pulse out
located on pin 5 of the lemo 6 will be different.
Normal mode: the camera default mode.
Shutter long: When using the intervallometer function of the cam-
era,this mode will synchronize a capping shutter to the camera
frame bursts.
Shutter flash: Used to synchronize a flash with the camera shutter.
Camera slave: to slave the camera shutter and speed to another
A-Minima.
Note: an incoming signal must be present when using the camera in
the "camera slave" mode. If the source signal is faulty, the camera
Chapter 2 - The
A-Minima Control Panel
31
Display light
In order to save battery power, the A-minima display backlight can
be turned off. From the camera default display, press the DOWN
key eight times to access the display light menu.
Press YES to enter, select ON or OFF with the UP or DOWN key.
Press YES to validate
Note:When pressing any keys of the control panel, the backlight
will be turned on for 30s, disregarding the display light setting.
Also, to prevent excessive drain on the small on-board lithium bat-
teries,the backlight will automaticaly turn itself off after five min-
utes. If initialized with timecode, the camera display will flash for
one second every ten seconds.
A-Minima Options:
This is the last menu on the list. It allows you to set the camera
footage units and the camera shutter pulse output.
Counter :
Go to the A-MINIMA OPTIONS menu, then press YES to enter.
COUNTER flashes, press YES then use the UP or DOWN key to
switch the footage counter between feet and meters. Press YES to
validate. The camera will then default to its default display, showing
you the desired footage unit.
Chapter 2 - The A-Minima Control Panel
30
Vue de la page 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 32 33

Commentaires sur ces manuels

Pas de commentaire